Programming Guide: Symbol (Motorola/Zebra) DS3508/DS6707 Scanners

RetailOps 2.0 includes new features requiring special configuration for barcode scanners. This simply alerts RO that, when scanning, a barcode will be sent to RO. Read the instructions below to program your scanner.

Please note:

  1. Your instance must be upgraded to RetailOps Version 2.1 and above to function properly.
  2. The Symbol DS3508 and DS6707 scanners are identical to the Motorola and Zebra DS3508 and DS6707 scanners.
  3. You will need to print this article with the barcodes below and scan them in the sequence indicated.

1. Set Factory Defaults

Scan this barcode to reset the scanner to its factory default settings.

1. Set Factory Defaults

2. Set Data Transmission Format

Scan this barcode to set the scan data format for your scanner.

2. Set Data Transmission Format

3. Set the Prefix

Scan the following barcodes to set the prefix for your scanner.

3. Set the Prefix
Have more questions? Submit a request

1 Comments

  • 0
    Avatar
    Kevin Frost

    Seems like a good article with good info. But alas, it didn't fix my scanner issues :/

Please sign in to leave a comment.
Powered by Zendesk